Troy-group EtherWind 802.11b Manual de usuario descargar pdf (Pagina 6)

System Requirements

To use the EtherWind for printing from a wireless network, you need an 802.11b

wireless network. The wireless network will consist of either of the following:

◗ An 802.11b wireless enabled PC or Macintosh printing straight to the printer

(Ad-Hoc or Peer-to-Peer Mode).

◗ An 802.11b wireless Access point allowing wireless and wired Ethernet enabled

computers to print to the EtherWind.

To configure and print to the EtherWind, you need the following:

◗ The MAC address from the label of the EtherWind (for example:

004017023F96).

◗ The following information from your wireless network administrator:

• Wireless Mode (Infrastructure or Ad-Hoc)

• The SSID (service set identifier) for your wireless network.

• The Radio Frequency Channel of the wireless network.

• If you are using TCP/IP (recommended for Windows Networks) and are

not connected to a DHCP server (for obtaining an IP Address automati-

cally), you will need a unique IP Address for the EtherWind wireless print

server (for example: 192.168.1.14). If the EtherWind is not on the same

IP subnet as the computers you are printing from, you will also need a

subnet mask and a router (default gateway) address.

Operating Systems Supported

◗ Windows 95, 98, ME, NT 4, 2000, XP

◗ MacOS 7.xx, 8.xx, 9.xx, MacOS X

Network Protocols Supported

◗ TCP/IP

• LPD/LPR

• Raw TCP/IP (port 9100)

• NetBIOS over IP (with SMB)

• Multiple configurable TCP port numbers

◗ TELNET

◗ WINS

◗ DHCP

1 2 3 4 5 6 7 8 9 10 11 ... 59 60

Sin comentarios

Troy-group EtherWind 802.11b Manual de usuario Pagina 6